You have no items in your shopping cart.
* Multiple installation capabilities make it easy to use.
* Ergonomically adjustable with fingertip tilt and pivot at the monitor connection.
* Infinitely adjustable cable management clips.
* Centris™ Technology provides smooth, fingertip tilt in all directions
* Screen angle stays set until you decide to re-adjust
* Clamp option allows mount to be installed from the top of the mounting surface
* Multiple mounting options: edge clamp, grommet clamp, grommet thru-bolt
* Clean look with minimal hardware visible from underside of work surface
* Independently adjustable tension at pivot points for customized control; tension can be optimized for touchscreen use
* Quick, easy cable management
* VESA® 75 x 75 mm and 100 x 100 mm compliant (interface brackets available for non-VESA® compliant displays)
* Depth in Closed Position: 6.4" (163 mm )
* Maximum Extension: 20.5" (521 mm )
* Pivot (desk/arm): 90°/180°
* Maximum Width of Monitor: 22.7" (576 mm)
* Weight Capacity (per monitor): 16.5 lbs (7.5 kg)
* Color: Silver or Black
* Mounting Surface Thickness: 0" - 3.5" (0 - 89 mm)
* Grommet Hole Size:0.38" - 3" (10 - 76 mm )
* VESA Compatibility: 75 x 75 mm and 100 x 100 mm (without extra interface bracket)
|SKUs for this product||KCD220, KCD220S, KCD220B|
|Your Monitor Weight||Under 18 Lbs|
|Number of Monitors||Two Monitors|
|Available Mounting Options||C - Clamp, Grommet, Bolt Through|
|Designed to Relieve||Eyes, Neck, Back, Shoulder|
|Ships In||Same Day|
Chief MFG KCD220 Dual Monitor Swing Arm Desk Mount
With the exception of electric, gas cylinder and one-way bearing mechanisms, Chief warrants the Chief MFG KCD220 Dual Monitor Swing Arm Desk Mount to be free of defects in material and workmanship for 10 years. All warranties are in effect for the original purchaser only. Chief disclaims liability for any modifications, improper installation and/or installations over the specified weight capacity of the Chief MFG KCD220 Dual Monitor Swing Arm Desk Mount.
Chief MFG sole warranty obligation to the owner of the Chief MFG KCD220 Dual Monitor Swing Arm Desk Mount is to repair or replace (at Chiefs discretion) defective Chief MFG KCD220 Dual Monitor Swing Arm Desk Mount at no charge to the original purchaser within the warranty period. The purchaser is responsible for returning the Chief MFG KCD220 Dual Monitor Swing Arm Desk Mount to Chief Manufacturing via prepaid shipping. To the maximum extent permitted by applicable law, Chief disclaims any other warranties, express or implied, including warranties of fitness for a particular purpose and warranties of merchantability. Chief bears no responsibility for incidental or consequential damages. This includes, but is not limited to, any labor charges for the repair of the Chief MFG KCD220 Dual Monitor Swing Arm Desk Mount performed by someone other than a Chief employee.
Because some states and jurisdictions do not allow the exclusion or limitation of liability for consequential or incidental damages, the above limitation may not apply. Chief will not be responsible for damage to Chief products caused by misuse, abuse, failure to properly package the Chief MFG KCD220 Dual Monitor Swing Arm Desk Mount for return to Chief or for damage caused by carriers during shipment to or from Chief. Any repairs to Chief MFG KCD220 Dual Monitor Swing Arm Desk Mount required due to misuse, abuse or shipping damage or repairs of defective Chief MFG KCD220 Dual Monitor Swing Arm Desk Mount outside the warranty period will be performed at the current rates established by Chief for factory service.