Idea at Work Proliftix Crank Rectangular Bi-Level Workcenters

Worksurface Height Adjustment in Reach

With a crank height-adjustable table, standing is as simple as sitting. Just raise the work surface and change your whole perspective!

Crank Adjustment

• Adjusts from 27 ¼"- 43 ¼" at 5 turns per inch with minimal effort.

• Crank handle located above right leg; can be removed and stowed once height is set.

Valued Features

• Flexibility - With over 20 models to choose from and the optional Proxi® Rail accessories, configurations are virtually limitless.

• Strength - 225 lb. table base capacity supports the equipment needs of today’s computer-intensive work environments.

• Plan for any office configuration – big or small, with a variety of work surface shapes and sizes.

• Create the look and feel in your office with a broad selection of laminates.

• Protection - Your investment is protected with our limited lifetime warranty and a 5 year warranty on the crank mechanism.

Additional Range

For extended reach, select a bi-level worksurface with 22¼” - 50¼” height range, exceeding ANSI/BIFMA 5th - 95th percentile requirements.

Note, dimensions provided above are nominal. Actual widths of all tables are reduced by 2" and depths by 1". For example, a nominal 48" x 24" rectangular table has an actual dimension of 46" x 23".

Idea at Work Proliftix Crank Rectangular Bi-Level Workcenters

Idea at Work warrants to the original purchaser of The Idea at Work Proliftix Crank Rectangular Bi-Level Workcenters to be free from defects in design, material and workmanship. Subject to the limitations below, Idea at Work warrants The Idea at Work Proliftix Crank Rectangular Bi-Level Workcenters to be free from material defects in materials and workmanship for the life of the product. With prompt written notice, Idea at Work will repair or replace, free of charge, the Idea at Work Proliftix Crank Rectangular Bi-Level Workcenters, part or component of Idea at Work Proliftix Crank Rectangular Bi-Level Workcenters which fails under normal use as a result of such defect.

Check below to see if The Idea at Work Proliftix Crank Rectangular Bi-Level Workcenters falls into an exception to the lifetime warranty:

* Mantis is warranted for 5 years.
* Electric components, motors and manual crank mechanisms are limited to 5 years.
* Electrical components for lighting products are warranted for 10 years
* Fluorescent bulbs and non-standard special ergonomics products are warranted for 1 year.
* Thermofoil laminate tops are warranted for 5 years.
* Customs, Modesty Screen fabric, specials and Lycra gel palm rests are warranted for 2 years.

Idea at Work obligations under this warranty is limited to replacing or repairing The Idea at Work Proliftix Crank Rectangular Bi-Level Workcenters or Idea at Work Proliftix Crank Rectangular Bi-Level Workcenters part that it determines to be defective after inspection by its authorized representative, following receipt of written notice of the defect from purchaser within the warranty period. This warranty shall apply to the original purchaser only, is nontransferable, and is not applicable outside the United States, Canada, and Mexico.


Any specific questions about The Idea at Work Proliftix Crank Rectangular Bi-Level Workcenters feel free to call us at 800-222-2456.